ThanksSon's flight controller not connecting to his simulator under Windows 10. This is how we tested the hardware under linux: $ lsusb | grep -i joy Bus 001 Device 006: ID 0483:5710 STMicroelectronics Joystick in FS Mode $ $ sudo apt install joystick $ ls /dev/input/by-id/*-joystick /dev/input/by-id/usb-FrSky_FrSky_Taranis_Joystick_00000000001B-event-joystick /dev/input/by-id/usb-FrSky_FrSky_Taranis_Joystick_00000000001B-joystick $ $ jstest /dev/input/by-id/usb-FrSky_FrSky_Taranis_Joystick_00000000001B-joystick Driver version is 2.1.0. Joystick (FrSky FrSky Taranis Joystick) has 7 axes (X, Y, Z, Rx, Ry, Rz, Throttle) and 24 buttons (BtnA, BtnB, BtnC, BtnX, BtnY, BtnZ, BtnTL, BtnTR, BtnTL2, BtnTR2, BtnSelect, BtnStart, BtnMode, BtnThumbL, BtnThumbR, ?, (null), (null), (null), (null), (null), (null), (null), (null)). Testing ... (interrupt to exit) Axes: 0: 20606 1: 16215 2: 16552 3: 16215 4: 0 5: 0 6: 0 Buttons: 0:off 1:off 2:off 3:off 4:off 5:off 6:off 7:off 8:off 9:off 10:off 11:off 12:off 13:off 14:off 15:off 16:off 17:off 18:off 19:off 20:off 21:off 22:off 23:off ^C $ $ lsusb -v -d 0483:5710 Bus 001 Device 006: ID 0483:5710 STMicroelectronics Joystick in FS Mode Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0483 STMicroelectronics idProduct 0x5710 Joystick in FS Mode bcdDevice 2.00 iManufacturer 1 FrSky iProduct 2 FrSky Taranis Joystick iSerial 3 00000000001B bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.11 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 54 Report Descriptors: * UNAVAILABLE * Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000b 1x 11 bytes bInterval 10 Device Status: 0x0001 Self Powered $
Perfecting the art of rural communications using Linux, cloud, internet, wireless technologies since 1993
STMicroelectronics Joystick in FS Mode
Mount dd dump of disk in linux or other remote storage represented as a file.
ThanksSo you have a remote storage or a file based dd backup and you want to mount a part of it in the middle. # parted /dev/mapper/hitachi_asdf1 unit b print Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/hitachi_asdf1: 42949672960B Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 1048576B 26214399B 25165824B primary bios_grub 2 26214400B 235929599B 209715200B primary msftdata 3 235929600B 445644799B 209715200B ext2 primary msftdata 4 445644800B 20913848319B 20468203520B primary msftdata 5 20913848320B 42871029759B 21957181440B primary msftdata 6 42871029760B 42892001279B 20971520B primary msftdata # # mount -o ro,loop,offset=235929600 /dev/mapper/hitachi_asdf1 /mnt # # losetup --offset 235929600 /dev/loop2 /dev/mapper/hitachi_asdf1 # fsck /dev/loop2
Subscribe to:
Posts (Atom)